Convolutional Neural Networks¶
Project: Write an Algorithm for a Dog Identification App¶
In this notebook, some template code has already been provided for you, and you will need to implement additional functionality to successfully complete this project. You will not need to modify the included code beyond what is requested. Sections that begin with '(IMPLEMENTATION)' in the header indicate that the following block of code will require additional functionality which you must provide. Instructions will be provided for each section, and the specifics of the implementation are marked in the code block with a 'TODO' statement. Please be sure to read the instructions carefully!
Note: Once you have completed all of the code implementations, you need to finalize your work by exporting the Jupyter Notebook as an HTML document. Before exporting the notebook to html, all of the code cells need to have been run so that reviewers can see the final implementation and output. You can then export the notebook by using the menu above and navigating to File -> Download as -> HTML (.html). Include the finished document along with this notebook as your submission.
In addition to implementing code, there will be questions that you must answer which relate to the project and your implementation. Each section where you will answer a question is preceded by a 'Question X' header. Carefully read each question and provide thorough answers in the following text boxes that begin with 'Answer:'. Your project submission will be evaluated based on your answers to each of the questions and the implementation you provide.
Note: Code and Markdown cells can be executed using the Shift + Enter keyboard shortcut. Markdown cells can be edited by double-clicking the cell to enter edit mode.
The rubric contains optional "Stand Out Suggestions" for enhancing the project beyond the minimum requirements. If you decide to pursue the "Stand Out Suggestions", you should include the code in this Jupyter notebook.
Why We're Here¶
In this notebook, you will make the first steps towards developing an algorithm that could be used as part of a mobile or web app. At the end of this project, your code will accept any user-supplied image as input. If a dog is detected in the image, it will provide an estimate of the dog's breed. If a human is detected, it will provide an estimate of the dog breed that is most resembling. The image below displays potential sample output of your finished project (... but we expect that each student's algorithm will behave differently!).
In this real-world setting, you will need to piece together a series of models to perform different tasks; for instance, the algorithm that detects humans in an image will be different from the CNN that infers dog breed. There are many points of possible failure, and no perfect algorithm exists. Your imperfect solution will nonetheless create a fun user experience!
The Road Ahead¶
We break the notebook into separate steps. Feel free to use the links below to navigate the notebook.
- Step 0: Import Datasets
- Step 1: Detect Humans
- Step 2: Detect Dogs
- Step 3: Create a CNN to Classify Dog Breeds (from Scratch)
- Step 4: Create a CNN to Classify Dog Breeds (using Transfer Learning)
- Step 5: Write your Algorithm
- Step 6: Test Your Algorithm
Step 0: Import Datasets¶
Make sure that you've downloaded the required human and dog datasets:
Note: if you are using the Udacity workspace, you DO NOT need to re-download these - they can be found in the /data folder as noted in the cell below.
Download the dog dataset. Unzip the folder and place it in this project's home directory, at the location
/dog_images.Download the human dataset. Unzip the folder and place it in the home directory, at location
/lfw.
Note: If you are using a Windows machine, you are encouraged to use 7zip to extract the folder.
In the code cell below, we save the file paths for both the human (LFW) dataset and dog dataset in the numpy arrays human_files and dog_files.
import numpy as np
from glob import glob
# load filenames for human and dog images
human_files = np.array(glob("/data/lfw/*/*"))
dog_files = np.array(glob("/data/dog_images/*/*/*"))
# print number of images in each dataset
print('There are %d total human images.' % len(human_files))
print('There are %d total dog images.' % len(dog_files))
Step 1: Detect Humans¶
In this section, we use OpenCV's implementation of Haar feature-based cascade classifiers to detect human faces in images.
OpenCV provides many pre-trained face detectors, stored as XML files on github. We have downloaded one of these detectors and stored it in the haarcascades directory. In the next code cell, we demonstrate how to use this detector to find human faces in a sample image.
import cv2
import matplotlib.pyplot as plt
%matplotlib inline
# extract pre-trained face detector
face_cascade = cv2.CascadeClassifier('haarcascades/haarcascade_frontalface_alt.xml')
# load color (BGR) image
img = cv2.imread(human_files[0])
# convert BGR image to grayscale
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
# find faces in image
faces = face_cascade.detectMultiScale(gray)
# print number of faces detected in the image
print('Number of faces detected:', len(faces))
# get bounding box for each detected face
for (x,y,w,h) in faces:
# add bounding box to color image
cv2.rectangle(img,(x,y),(x+w,y+h),(255,0,0),2)
# convert BGR image to RGB for plotting
cv_rgb = cv2.cvtColor(img, cv2.COLOR_BGR2RGB)
# display the image, along with bounding box
plt.imshow(cv_rgb)
plt.show()
Before using any of the face detectors, it is standard procedure to convert the images to grayscale. The detectMultiScale function executes the classifier stored in face_cascade and takes the grayscale image as a parameter.
In the above code, faces is a numpy array of detected faces, where each row corresponds to a detected face. Each detected face is a 1D array with four entries that specifies the bounding box of the detected face. The first two entries in the array (extracted in the above code as x and y) specify the horizontal and vertical positions of the top left corner of the bounding box. The last two entries in the array (extracted here as w and h) specify the width and height of the box.
Write a Human Face Detector¶
We can use this procedure to write a function that returns True if a human face is detected in an image and False otherwise. This function, aptly named face_detector, takes a string-valued file path to an image as input and appears in the code block below.
# returns "True" if face is detected in image stored at img_path
def face_detector(img_path):
img = cv2.imread(img_path)
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
faces = face_cascade.detectMultiScale(gray)
return len(faces) > 0
(IMPLEMENTATION) Assess the Human Face Detector¶
Question 1: Use the code cell below to test the performance of the face_detector function.
- What percentage of the first 100 images in
human_fileshave a detected human face? - What percentage of the first 100 images in
dog_fileshave a detected human face?
Ideally, we would like 100% of human images with a detected face and 0% of dog images with a detected face. You will see that our algorithm falls short of this goal, but still gives acceptable performance. We extract the file paths for the first 100 images from each of the datasets and store them in the numpy arrays human_files_short and dog_files_short.
Answer: (You can print out your results and/or write your percentages in this cell)
from tqdm import tqdm
human_files_short = human_files[:100]
dog_files_short = dog_files[:100]
#-#-# Do NOT modify the code above this line. #-#-#
## TODO: Test the performance of the face_detector algorithm
## on the images in human_files_short and dog_files_short.
detected_humans_human_files = 0
detected_humans_dog_files = 0
for human in range(len(human_files_short)):
detected_humans_human_files += face_detector(human_files_short[human])
detected_humans_dog_files += face_detector(dog_files_short[human])
human += 1
human_percentage_human_files = (detected_humans_human_files/len(human_files_short))*100
human_percentage_dog_files = (detected_humans_dog_files/len(dog_files_short))*100
print("Number of humans detected on " + str(len(human_files_short)) +" human images: " + str(detected_humans_human_files))
print("In human_files, the human faces were detected " + str(human_percentage_human_files) + "% of the time")
print("Number of humans detected on " + str(len(dog_files_short)) +" dog images: " + str(detected_humans_dog_files))
print("In dog_files, the human faces were falsely detected in dog images " + str(human_percentage_dog_files) + "% of the time")
We suggest the face detector from OpenCV as a potential way to detect human images in your algorithm, but you are free to explore other approaches, especially approaches that make use of deep learning :). Please use the code cell below to design and test your own face detection algorithm. If you decide to pursue this optional task, report performance on human_files_short and dog_files_short.
### (Optional)
### TODO: Test performance of anotherface detection algorithm.
### Feel free to use as many code cells as needed
# make sure to have all the necessary libraries preloaded
#def custom_face_detector
#need a way to mix the dog and human images while keeping track of labels
#assign lables to images based on what folder they originated from- if humans,
#mark them as class 1, if dogs- mark them as 0
#train on all but the last 100 images from both humans and dogs files
#use the last 100 pictures for testing set, to get an accurate comparison with the ocv model
Step 2: Detect Dogs¶
In this section, we use a pre-trained model to detect dogs in images.
Obtain Pre-trained VGG-16 Model¶
The code cell below downloads the VGG-16 model, along with weights that have been trained on ImageNet, a very large, very popular dataset used for image classification and other vision tasks. ImageNet contains over 10 million URLs, each linking to an image containing an object from one of 1000 categories.
import torch
import torchvision.models as models
# check if CUDA is available
use_cuda = torch.cuda.is_available()
# define VGG16 model
VGG16 = models.vgg16(pretrained=True)
# move model to GPU if CUDA is available
if use_cuda:
VGG16 = VGG16.cuda()
torch.cuda.is_available()
Given an image, this pre-trained VGG-16 model returns a prediction (derived from the 1000 possible categories in ImageNet) for the object that is contained in the image.
(IMPLEMENTATION) Making Predictions with a Pre-trained Model¶
In the next code cell, you will write a function that accepts a path to an image (such as 'dogImages/train/001.Affenpinscher/Affenpinscher_00001.jpg') as input and returns the index corresponding to the ImageNet class that is predicted by the pre-trained VGG-16 model. The output should always be an integer between 0 and 999, inclusive.
Before writing the function, make sure that you take the time to learn how to appropriately pre-process tensors for pre-trained models in the PyTorch documentation.
from PIL import Image
import torchvision.transforms as transforms
import torch
import torchvision
from torchvision import datasets, models, transforms
def load_image(img_path):
image = Image.open(img_path).convert('RGB')
in_transform = transforms.Compose([
transforms.Resize(size=(244, 244)),
transforms.ToTensor()])
image = in_transform(image)[:3,:,:].unsqueeze(0)
return image
VGG16.eval()
def VGG16_predict(img_path):
'''
Use pre-trained VGG-16 model to obtain index corresponding to
predicted ImageNet class for image at specified path
Args:
img_path: path to an image
Returns:
Index corresponding to VGG-16 model's prediction
'''
## TODO: Complete the function.
## Load and pre-process an image from the given img_path
## Return the *index* of the predicted class for that image
transform = transforms.Compose([ #[1]
transforms.Resize(256), #[2]
transforms.CenterCrop(224), #[3]
transforms.ToTensor(), #[4]
transforms.Normalize( #[5]
mean=[0.485, 0.456, 0.406], #[6]
std=[0.229, 0.224, 0.225] #[7]
)])
img = Image.open(img_path)
img_t = transform(img)
batch_t = torch.unsqueeze(img_t, 0)
model = VGG16.cpu()
VGG16.eval()
out = VGG16(batch_t)
_, index = torch.max(out, 1)
return index # predicted class index
(IMPLEMENTATION) Write a Dog Detector¶
While looking at the dictionary, you will notice that the categories corresponding to dogs appear in an uninterrupted sequence and correspond to dictionary keys 151-268, inclusive, to include all categories from 'Chihuahua' to 'Mexican hairless'. Thus, in order to check to see if an image is predicted to contain a dog by the pre-trained VGG-16 model, we need only check if the pre-trained model predicts an index between 151 and 268 (inclusive).
Use these ideas to complete the dog_detector function below, which returns True if a dog is detected in an image (and False if not).
### returns "True" if a dog is detected in the image stored at img_path
def dog_detector(img_path):
## TODO: Complete the function.
#img = cv2.imread(img_path)
#gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
dogs = VGG16_predict(img_path)
if (dogs >= 151 and dogs <= 268):
return True
else:
return False
#return True # true/false
print(dog_detector(dog_files_short[0]))
print(dog_detector(human_files_short[0]))
(IMPLEMENTATION) Assess the Dog Detector¶
Question 2: Use the code cell below to test the performance of your dog_detector function.
- What percentage of the images in
human_files_shorthave a detected dog? - What percentage of the images in
dog_files_shorthave a detected dog?
Answer:
### TODO: Test the performance of the dog_detector function
### on the images in human_files_short and dog_files_short.
detected_dogs_dog_files = 0
detected_dogs_human_files = 0
for dog in range(len(dog_files_short)):
detected_dogs_dog_files += dog_detector(dog_files_short[dog])
detected_dogs_human_files += dog_detector(human_files_short[dog])
human += 1
dog_percentage_dog_files = (detected_dogs_dog_files/len(dog_files_short))*100
dog_percentage_human_files = (detected_dogs_human_files/len(human_files_short))*100
print("Number of dogs detected on " + str(len(dog_files_short)) +" dog images: " + str(detected_dogs_dog_files))
print("In dog_files_short, the dogs were correctly detected " + str(dog_percentage_dog_files) + "% of the time")
print("Number of dogs detected on " + str(len(human_files_short)) +" human images: " + str(detected_dogs_human_files))
print("In human_files_short, the dogs were falsely detected in human images " + str(dog_percentage_human_files) + "% of the time")
We suggest VGG-16 as a potential network to detect dog images in your algorithm, but you are free to explore other pre-trained networks (such as Inception-v3, ResNet-50, etc). Please use the code cell below to test other pre-trained PyTorch models. If you decide to pursue this optional task, report performance on human_files_short and dog_files_short.
### (Optional)
### TODO: Report the performance of another pre-trained network.
### Feel free to use as many code cells as needed.
Step 3: Create a CNN to Classify Dog Breeds (from Scratch)¶
Now that we have functions for detecting humans and dogs in images, we need a way to predict breed from images. In this step, you will create a CNN that classifies dog breeds. You must create your CNN from scratch (so, you can't use transfer learning yet!), and you must attain a test accuracy of at least 10%. In Step 4 of this notebook, you will have the opportunity to use transfer learning to create a CNN that attains greatly improved accuracy.
We mention that the task of assigning breed to dogs from images is considered exceptionally challenging. To see why, consider that even a human would have trouble distinguishing between a Brittany and a Welsh Springer Spaniel.
| Brittany | Welsh Springer Spaniel |
|---|---|
 |
 |
It is not difficult to find other dog breed pairs with minimal inter-class variation (for instance, Curly-Coated Retrievers and American Water Spaniels).
| Curly-Coated Retriever | American Water Spaniel |
|---|---|
 |
 |
Likewise, recall that labradors come in yellow, chocolate, and black. Your vision-based algorithm will have to conquer this high intra-class variation to determine how to classify all of these different shades as the same breed.
| Yellow Labrador | Chocolate Labrador | Black Labrador |
|---|---|---|
 |
 |
 |
We also mention that random chance presents an exceptionally low bar: setting aside the fact that the classes are slightly imabalanced, a random guess will provide a correct answer roughly 1 in 133 times, which corresponds to an accuracy of less than 1%.
Remember that the practice is far ahead of the theory in deep learning. Experiment with many different architectures, and trust your intuition. And, of course, have fun!
(IMPLEMENTATION) Specify Data Loaders for the Dog Dataset¶
Use the code cell below to write three separate data loaders for the training, validation, and test datasets of dog images (located at dog_images/train, dog_images/valid, and dog_images/test, respectively). You may find this documentation on custom datasets to be a useful resource. If you are interested in augmenting your training and/or validation data, check out the wide variety of transforms!
import os
from torchvision import datasets
import torchvision.transforms as transforms
import torch
import numpy as np
from PIL import ImageFile
ImageFile.LOAD_TRUNCATED_IMAGES = True
### TODO: Write data loaders for training, validation, and test sets
## Specify appropriate transforms, and batch_sizes
batch_size = 20
num_workers = 2
data_dir = '/data/dog_images'
train_dir = os.path.join(data_dir, 'train/')
valid_dir = os.path.join(data_dir, 'valid/')
test_dir = os.path.join(data_dir, 'test/')
standard_normalization = transforms.Normalize(mean=[0.485, 0.456, 0.406],
std=[0.229, 0.224, 0.225])
#standard_normalization = transforms.Normalize(mean=[0.5, 0.5, 0.5],
# std=[0.5, 0.5, 0.5])
data_transforms = {'train': transforms.Compose([#transforms.RandomResizedCrop(224),
transforms.Resize(256),
transforms.RandomResizedCrop(224),
transforms.RandomHorizontalFlip(),
transforms.RandomRotation(30),
transforms.ToTensor(),
standard_normalization]),
'val': transforms.Compose([transforms.Resize(size=(224,224)),
transforms.ToTensor(),
standard_normalization]),
'test': transforms.Compose([transforms.Resize(size=(224,224)),
transforms.ToTensor(),
standard_normalization])
}
train_data = datasets.ImageFolder(train_dir, transform=data_transforms['train'])
valid_data = datasets.ImageFolder(valid_dir, transform=data_transforms['val'])
test_data = datasets.ImageFolder(test_dir, transform=data_transforms['test'])
train_loader = torch.utils.data.DataLoader(train_data,
batch_size=batch_size,
num_workers=num_workers,
shuffle=True)
valid_loader = torch.utils.data.DataLoader(valid_data,
batch_size=batch_size,
num_workers=num_workers,
shuffle=False)
test_loader = torch.utils.data.DataLoader(test_data,
batch_size=batch_size,
num_workers=num_workers,
shuffle=False)
loaders_scratch = {
'train': train_loader,
'valid': valid_loader,
'test': test_loader
}
Question 3: Describe your chosen procedure for preprocessing the data.
- How does your code resize the images (by cropping, stretching, etc)? What size did you pick for the input tensor, and why?
- Did you decide to augment the dataset? If so, how (through translations, flips, rotations, etc)? If not, why not?
Answer:
1) My code initially resizes all images in the training dataset to 256x256. Next, it randomely cropped out a slightly smaller part of each image for further processing. The new dimensions became 224x224. I chose these dimensions for my input tensor, because they worked well in one of my previous models (these dimensions still allow for various pattern extraction, while helping to reduce the training time).
2) I augmented the dataset through random cropping, horizontal flips, random rotations for up to 30 degrees, and normalized the images. The augmentation helped me improve the test accuracy of the model by nearly 10%.
(IMPLEMENTATION) Model Architecture¶
Create a CNN to classify dog breed. Use the template in the code cell below.
import torch.nn as nn
import torch.nn.functional as F
# define the CNN architecture
class Net(nn.Module):
### TODO: choose an architecture, and complete the class
def __init__(self):
super(Net, self).__init__()
## Define layers of a CNN
# convolutional layer
self.conv1 = nn.Conv2d(3, 16, 3, padding=1)
self.conv2 = nn.Conv2d(16, 32, 3, padding=1)
self.conv3 = nn.Conv2d(32, 64, 3, padding=1)
self.conv4 = nn.Conv2d(64, 128, 3, padding=1)
# max pooling layer
self.pool = nn.MaxPool2d(2, 2)
# fully connected layers
self.fc1 = nn.Linear(128 * 14 * 14 , 512)
self.fc2 = nn.Linear(512, 133)
self.dropout = nn.Dropout(.25)
def forward(self, x):
## Define forward behavior
x = F.relu(self.conv1(x))
x = self.pool(x)
x = F.relu(self.conv2(x))
x = self.pool(x)
x = F.relu(self.conv3(x))
x = self.pool(x)
x = F.relu(self.conv4(x))
x = self.pool(x)
x = x.view(-1, 128 * 14 * 14)
x = self.dropout(x)
x = F.relu(self.fc1(x))
x = self.dropout(x)
x = self.fc2(x)
return x
#-#-# You so NOT have to modify the code below this line. #-#-#
# instantiate the CNN
model_scratch = Net()
# move tensors to GPU if CUDA is available
if use_cuda:
model_scratch.cuda()
print(model_scratch)
Question 4: Outline the steps you took to get to your final CNN architecture and your reasoning at each step.
Answer:
Since the dog breed identifier needs to distinguish between fine details in appearance of different dogs (such as type of fur, specific color pattern), as opposed to lower level features (has legs/has wheels), I decided to go for finding as many high level features as the processing speed of my gpu allowed. Four convolutional layers proved to be efficient enough for the task. To prevent my model from having to process too many features, I used a MaxPool layer after each convolutional layer. To prevent overfitting, I used the dropout on each of the fully connected layers. Some numbers, like out_features for the first fc layer, were chosen as optimal after experimenting with a few different values.
(IMPLEMENTATION) Specify Loss Function and Optimizer¶
Use the next code cell to specify a loss function and optimizer. Save the chosen loss function as criterion_scratch, and the optimizer as optimizer_scratch below.
import torch.optim as optim
### TODO: select loss function
criterion_scratch = nn.CrossEntropyLoss()
### TODO: select optimizer
optimizer_scratch = optim.SGD(model_scratch.parameters(), lr = 0.1)
(IMPLEMENTATION) Train and Validate the Model¶
Train and validate your model in the code cell below. Save the final model parameters at filepath 'model_scratch.pt'.
import numpy as np
from PIL import ImageFile
ImageFile.LOAD_TRUNCATED_IMAGES = True
def train(n_epochs, loaders, model, optimizer, criterion, use_cuda, save_path):
"""returns trained model"""
# initialize tracker for minimum validation loss
valid_loss_min = np.Inf
for epoch in range(1, n_epochs+1):
# initialize variables to monitor training and validation loss
running_loss = 0.0
train_loss = 0.0
valid_loss = 0.0
###################
# train the model #
###################
model.train()
for batch_idx, (data, target) in enumerate(loaders['train']):
optimizer.zero_grad()
# move to GPU
if use_cuda:
data, target = data.cuda(), target.cuda()
## find the loss and update the model parameters accordingly
## record the average training loss, using something like
optimizer.zero_grad()
output = model(data)
# calculate loss
loss = criterion(output, target)
# back prop
loss.backward()
# grad
optimizer.step()
train_loss = train_loss + ((1 / (batch_idx + 1)) * (loss.data - train_loss))
######################
# validate the model #
######################
model.eval()
for batch_idx, (data, target) in enumerate(loaders['valid']):
# move to GPU
if use_cuda:
data, target = data.cuda(), target.cuda()
output = model(data)
loss = criterion(output, target)
#valid_loss = valid_loss + ((1 / (batch_idx + 1)) * (loss.data - valid_loss))
valid_loss = valid_loss + ((1 / (batch_idx + 1)) * (loss.data - valid_loss))
train_loss = train_loss/len(loaders['train'].dataset)
valid_loss = valid_loss/len(loaders['valid'].dataset)
# print training/validation statistics
print('Epoch: {} \tTraining Loss: {:.6f} \tValidation Loss: {:.6f}'.format(
epoch,
train_loss,
valid_loss
))
## TODO: save the model if validation loss has decreased
if valid_loss < valid_loss_min:
valid_loss_min = valid_loss
torch.save(model.state_dict(), save_path)
print('Validation Loss improved, saving model....')
# return trained model
return model
# train the model
model_scratch = train(30, loaders_scratch, model_scratch, optimizer_scratch,
criterion_scratch, use_cuda, 'model_scratch.pt')
# load the model that got the best validation accuracy
model_scratch.load_state_dict(torch.load('model_scratch.pt'))
(IMPLEMENTATION) Test the Model¶
Try out your model on the test dataset of dog images. Use the code cell below to calculate and print the test loss and accuracy. Ensure that your test accuracy is greater than 10%.
def test(loaders, model, criterion, use_cuda):
# monitor test loss and accuracy
test_loss = 0.
correct = 0.
total = 0.
model.eval()
for batch_idx, (data, target) in enumerate(loaders['test']):
# move to GPU
if use_cuda:
data, target = data.cuda(), target.cuda()
# forward pass: compute predicted outputs by passing inputs to the model
output = model(data)
# calculate the loss
loss = criterion(output, target)
# update average test loss
test_loss = test_loss + ((1 / (batch_idx + 1)) * (loss.data - test_loss))
# convert output probabilities to predicted class
pred = output.data.max(1, keepdim=True)[1]
# compare predictions to true label
correct += np.sum(np.squeeze(pred.eq(target.data.view_as(pred))).cpu().numpy())
total += data.size(0)
print('Test Loss: {:.6f}\n'.format(test_loss))
print('\nTest Accuracy: %2d%% (%2d/%2d)' % (
100. * correct / total, correct, total))
# call test function
test(loaders_scratch, model_scratch, criterion_scratch, use_cuda)
Step 4: Create a CNN to Classify Dog Breeds (using Transfer Learning)¶
You will now use transfer learning to create a CNN that can identify dog breed from images. Your CNN must attain at least 60% accuracy on the test set.
(IMPLEMENTATION) Specify Data Loaders for the Dog Dataset¶
Use the code cell below to write three separate data loaders for the training, validation, and test datasets of dog images (located at dogImages/train, dogImages/valid, and dogImages/test, respectively).
If you like, you are welcome to use the same data loaders from the previous step, when you created a CNN from scratch.
## TODO: Specify data loaders
loaders_transfer = {
'train': train_loader,
'valid': valid_loader,
'test': test_loader
}
(IMPLEMENTATION) Model Architecture¶
Use transfer learning to create a CNN to classify dog breed. Use the code cell below, and save your initialized model as the variable model_transfer.
import torchvision.models as models
import torch.nn as nn
## TODO: Specify model architecture
#model_transfer = VGG16
model_transfer = models.vgg16(pretrained=True)
# Freeze training for all "features" layers
for param in model_transfer.features.parameters():
param.requires_grad = False
model_transfer.classifier[6].out_features = 133
fc_parameters = model_transfer.classifier[6].parameters()
#Retrain the last fully connected layer
for param in model_transfer.classifier[6].parameters():
param.requires_grad = True
if use_cuda:
model_transfer = model_transfer.cuda()
print(model_transfer)
Question 5: Outline the steps you took to get to your final CNN architecture and your reasoning at each step. Describe why you think the architecture is suitable for the current problem.
Answer:
Since the pretrained network I used was already pretrained to detect dogs, it did not require many changes. It did, however, need a different number of classes in the last fully connected layer to be able to perform the new task, so I simply changed the number of the output nodes from original 1000 to 133 (number of the dog breeds in the new data). I froze all the weights in the previous layers and only retrained the layer that was modified, which yielded about 71% accuracy on the test data.
(IMPLEMENTATION) Specify Loss Function and Optimizer¶
Use the next code cell to specify a loss function and optimizer. Save the chosen loss function as criterion_transfer, and the optimizer as optimizer_transfer below.
criterion_transfer = nn.CrossEntropyLoss()
optimizer_transfer = optim.SGD(model_transfer.classifier[6].parameters(), lr=0.001)
(IMPLEMENTATION) Train and Validate the Model¶
Train and validate your model in the code cell below. Save the final model parameters at filepath 'model_transfer.pt'.
# train the model
n_epochs = 20
model_transfer = train(n_epochs, loaders_transfer, model_transfer, optimizer_transfer, criterion_transfer, use_cuda, 'model_transfer.pt')
# load the model that got the best validation accuracy (uncomment the line below)
model_transfer.load_state_dict(torch.load('model_transfer.pt'))
(IMPLEMENTATION) Test the Model¶
Try out your model on the test dataset of dog images. Use the code cell below to calculate and print the test loss and accuracy. Ensure that your test accuracy is greater than 60%.
test(loaders_transfer, model_transfer, criterion_transfer, use_cuda)
(IMPLEMENTATION) Predict Dog Breed with the Model¶
Write a function that takes an image path as input and returns the dog breed (Affenpinscher, Afghan hound, etc) that is predicted by your model.
### TODO: Write a function that takes a path to an image as input
### and returns the dog breed that is predicted by the model.
# list of class names by index, i.e. a name can be accessed like class_names[0]
from keras.preprocessing import image
#class_names = [item[4:].replace("_", " ") for item in loaders_transfer['train'].dataset.classes]
#class_names = loaders_transfer['train'].dataset.classes
class_names = [item[4:] for item in loaders_transfer['train'].dataset.classes]
#class_names_clean = [item.replace("_", " ") for item in class_names]
from torchvision import transforms
transform = transforms.Compose([ #[1]
transforms.Resize(256), #[2]
transforms.CenterCrop(224), #[3]
transforms.ToTensor(), #[4]
transforms.Normalize( #[5]
mean=[0.485, 0.456, 0.406], #[6]
std=[0.229, 0.224, 0.225] #[7]
)])
def show_image(path):
img = image.load_img(path, target_size=(224, 224))
img = image.img_to_array(img)
plt.imshow(img/255)
plt.show()
def predict_breed_transfer(model, classes, path):
# load the image and return the predicted breed
img = Image.open(path)
img_t = transform(img)
batch_t = torch.unsqueeze(img_t, 0)
model = model.cpu()
model.eval()
out = model(batch_t)[:,:132]
_, index = torch.max(out[:132], 1)
percentage = torch.nn.functional.softmax(out[:132], dim=1)[0] * 100
return classes[index]
predict_breed_transfer(model_transfer, class_names, '002.jpg')
#print(class_names_clean)
model_transfer
#pred = output.data.max(1, keepdim=True)[1]
predict_breed_transfer(model_transfer, class_names, '002.jpg')
Step 5: Write your Algorithm¶
Write an algorithm that accepts a file path to an image and first determines whether the image contains a human, dog, or neither. Then,
- if a dog is detected in the image, return the predicted breed.
- if a human is detected in the image, return the resembling dog breed.
- if neither is detected in the image, provide output that indicates an error.
You are welcome to write your own functions for detecting humans and dogs in images, but feel free to use the face_detector and human_detector functions developed above. You are required to use your CNN from Step 4 to predict dog breed.
Some sample output for our algorithm is provided below, but feel free to design your own user experience!
(IMPLEMENTATION) Write your Algorithm¶
### TODO: Write your algorithm.
### Feel free to use as many code cells as needed.
def run_app(img_path):
## handle cases for a human face, dog, and neither
img = Image.open(img_path)
plt.imshow(img)
plt.show()
if dog_detector(img_path) is True:
prediction = predict_breed_transfer(model_transfer, class_names, img_path)
prediction_clean = prediction.replace("_", " ")
print("Hello, dog!\nYour predicted breed is... {0}".format(prediction_clean))
elif face_detector(img_path) > 0:
prediction = predict_breed_transfer(model_transfer, class_names, img_path)
prediction_clean = prediction.replace("_", " ")
print("Hello, human!\nYou look like a... {0}".format(prediction_clean))
count = 3
for item in range (len(dog_files)):
if (prediction in dog_files[item]):
show_image(dog_files[item])
count -=1
if count <=0:
break
else:
print("Oops... Cannot identify the picture.\nThe image contains something other than a human or a dog.")
dog_detector('002.jpg')
#predict_breed_transfer(model_transfer, class_names,'001.jpg')
Step 6: Test Your Algorithm¶
In this section, you will take your new algorithm for a spin! What kind of dog does the algorithm think that you look like? If you have a dog, does it predict your dog's breed accurately? If you have a cat, does it mistakenly think that your cat is a dog?
(IMPLEMENTATION) Test Your Algorithm on Sample Images!¶
Test your algorithm at least six images on your computer. Feel free to use any images you like. Use at least two human and two dog images.
Question 6: Is the output better than you expected :) ? Or worse :( ? Provide at least three possible points of improvement for your algorithm.
Answer: (Three possible points for improvement)
The output proved to work pretty well, although it identifies dogs better than matches humans with similar looking dogs. The following steps could potentially improve that task:
1) Increase the dataset of dog images
2) Try different pre-tained model instead of vgg16
3) Add more than one fully connected layer to the existing pretrained network to discover more higher-level features that could identify and correlate finer details between dog and human images (although this will more likely only increase the performance of identifying dog breed, because the features may turn out to be too biased towards features specific to dogs, and therefore generalize on humans worse as the result)
## TODO: Execute your algorithm from Step 6 on
## at least 6 images on your computer.
## Feel free to use as many code cells as needed.
## suggested code, below
run_app('005.jpg')
#for file in np.hstack((human_files[:3], dog_files[:3])):
# run_app(file)
run_app('David_Tenant.jpg')
run_app('stephen_king_001.jpg')
run_app('elon_musk_002.jpg')
run_app('elon_musk_003.jpg')
run_app('trump_001.jpg')
run_app('trump_002.jpg')
run_app('oprah.jpg')
run_app('cat.jpg')
run_app('006.jpg')
